- This event has passed.
- Copied to clipboard!
- Share this post on Twitter
- Share this post on Facebook
- Share this post via Email
- Share this post via Linkedin
Take advantage of a three-day immersion in Solids Handling and Pneumatic Conveying. This course is a combination of two popular AIChE courses: CH032: Flow of Solids in Bins, Hoppers, Chutes, and Feeders and CH033: Pneumatic Conveying of Bulk Solids.
CH032: Flow of Solids in Bins, Hoppers, Chutes, and Feeders
Too often, bulk solids are being handled without a good understanding of how to correctly design, select, troubleshoot, maintain and purchase bulk solids handling equipment.
As a result, costly flow problems occur that slow production. In this course, you’ll learn proven design and troubleshooting principles for handling bulk solids in bins, hoppers, feeders and transfer chutes for safe and trouble-free plant operation.
Ensure equipment operates efficiently, safely and reliably
In two days, you’ll review the fundamentals of bulk material flow and examine common flow problems, types of flow patterns in equipment and how flow properties of bulk solids are measured. You’ll consider feeder design, learn proven troubleshooting techniques and gain insight into flow problems that occur when handling fine powders. The instructor also covers common mechanisms of segregation and solutions to these costly problems and gives practical advice for using flow aid devices.
CH033: Pneumatic Conveying of Bulk Solids
Although many pneumatic conveying equipment advances have been made, costly problems – including wear, attrition, rate limitation and line plugging – continue to occur.
Learn how to apply practical design and troubleshooting principles to improve the efficiency, safety and reliability of pneumatic conveying systems transporting powders and bulk solids.
Ensure trouble-free flow
In one day, you’ll review the fundamentals of gas/solids flow and address common pneumatic conveying problems, modes of transport in a pipeline and scale-model tests and their use in designing and evaluating poorly operating systems. You’ll discuss line chargers (feeders), proven pipeline layout rules and criteria for elbow/bend selection. The instructor also will cover more specialized topics including dense phase conveying systems and gas/solids separators such as cyclones, filters and bag houses.
- July 9, 2019
- July 11, 2019
- Boston, MA United States